You can read abstracts of the papers listed below. Copy of published technical papers are available on request from Turbotect or you can access selected papers on line through ASME digital store at http://store.asme.org. When you arrive on the ASME site, simply click on "Conference Papers". You can browse listings of papers, read abstracts, and purchase downloads for immediate delivery.

The Institution of Diesel and Gas Turbine Engineers
Fourth Gas Turbine Conference of the Institution of Diesel and Gas Turbine Engineers
Life Cycle Engineering, The Key to Successful and Profitable Power Plant Operation
Peter A. Huber, Turbotect Ltd.
November 2007, Milton Keynes, UK

ASME Paper GT2007-28227
On Line Compressor Washing On Large Frame 9-FA Gas Turbines, Erosion on R0 Compressor Blade Leading Edge, Field Performance with a Novel On Line Wash System
Jos Oosting, Klaas Boonstra, Annemarie de Haan, Dick van der Vecht, Electrabel Nederlands nv, Eems Centrale, The Netherlands
Jean-Pierre Stalder and Urs Eicher, Turbotect Ltd.
May 2007, Montreal, Canada

Best Paper Award
The ASME - IGTI Industrial and Cogeneration committee presented a “Best Paper” award and a plaque to the authors of this paper GT2007-28227. The award was presented at the ASME Gas Turbine Technical Congress, Exposition; ASME TURBO-EXPO 2008: Power for Land, Sea and Air, 9-13 June 2008 in Berlin, Germany. This paper was presented in the 2007 ASME Turbo-Expo conference held in Montreal Canada and was deemed to be of high quality and of value to end users covering an important ongoing issue with large F-Class turbines.

For a complete copy please feel free to contact us.

33rd Turbomachinery Symposium, Turbomachinery Laboratory, Texas A&M University
Gas Turbine Axial Compressor Fouling and Washing
Cyrus B. Meher-Homji, Bechtel Corporation, USA
Andrew F. Bromley, Turbotect (USA), Inc.
September 2004, Houston, Texas
The full paper can be downloaded (pdf) from the Texas A&M University website with the Adobe Reader Version 6.0 at:
http://turbolab.tamu.edu/pubs/Turbo33/T33pg163.pdf

ASME Paper GT2003-38691
Firing Low Viscosity Liquid Fuels in Heavy Duty Gas Turbines
Jean-Pierre Stalder and Phil Roberts, Turbotect Ltd.
June 2003, Atlanta, USA

Power-Gen Asia 2002
Key Considerations When Embarking on a Heavy Fuel Project
Michel Molière, GE Power Systems
Peter Huber, Jean-Pierre Stalder and Andrew F. Bromley, Turbotect Ltd.
October 2002, Singapore

ASME Paper 2001-GT-74
Daesan Combined Cycle Power Plant,Successful Operating Experience on Low Sulphur Waxy Residual Fuel Oil
Koen-Woo Lee, Hwan-Doo Kim, & Sung-Il Wi, Hyundai Heavy Industries Co. Ltd.
Ulsan, Daesan, Korea
Jean-Pierre Stalder,Turbotect Ltd.
June 2001, New Orleans, USA
October 2001, Shenzhen, China (Asia Pacific Symposium on Gas Turbine Power Generation and Fuel Conversion Technology by the ASME Intl. Hongkong Section & the Chinese Association for Gas Turbine Power Generation, CAGTPG)

ASME IJPGC2001/PWR-19148
Salt Percolation Through Gas Turbine Air Filtration Systems and its Contribution to Total Contaminant Level
Jean-Pierre Stalder,Turbotect Ltd.
Joël Sire, Serma Technologies, Belfort, France
June 2001, New Orleans, USA

Baltica V - 2001
Life Cycle Engineering, the Key for a Successful and Profitable Power Plant Operation
Peter A. Huber, Turbotect Ltd.
June 2001, Porvoo, Finland

ASME Paper 00-GT-138
Use of Chromium Containing Fuel Additive to Reduce High Temperature Corrosion of Hot Section Parts
Jean-Pierre Stalder and Peter A. Huber, Turbotect Ltd.
May 2000, Münich, Germany

Gas Turbine Fuel Washing Theory and Practice
Dr. Phil Roberts, Turbotect Ltd.
April 1999

Coatings for Stationary Gas Turbines
Peter A. Huber, Turbotect Ltd.
March 1999, Fuzhou, China

The Institute of Mechanical Engineers (IMECHE; CCGT-5)
Gas Turbine Compressor Washing – Review and State of the Art Technology
Jean-Pierre Stalder, Turbotect Ltd.
October 1998, London, England

Review of Gas Turbine Fuel Treatment
Rudolf Zubler and Jean-Pierre Stalder, Turbotect Ltd.
June 1998, Shenzhen, China

Gas Turbine Compressor Fouling - Phenomena and Remedy
Jean-Pierre Stalder, Turbotect Ltd.
June 1998, Shenzhen, China

Transactions of the ASME "Journal of Engineering for Gas Turbines and Power", Volume 123, April 2001, page 363 to 370 (ASME Paper 98-GT-420)
Gas Turbine Compressor Washing
State of the Art - Field Experiences
Jean-Pierre Stalder, Turbotect Ltd.
June 1998, Stockholm, Sweden
This paper was selected by the "IGTI - International Gas Turbine Institute, The American Society of Mechanical Engineers" as recipient for the "1998 John P. Davis Award".
The award was presented at the 45th ASME Gas Turbine and Aeroengine Technical Congress, Exposition and Users Symposium; ASME TURBO EXPO 2000 Land, Sea and Air, 8-11 May 2000 in Münich, Germany.
The award recognizes gas turbine application papers which are judged to be of exceptional value to those supplying or using gas turbines and their support systems. This paper was judged by the IGTI/ASME award committee as an excellent contribution to the literature of gas turbine engine technology.

ASME Paper 98-GT-416
Influence of Axial Compressor Fouling on Gas Turbine Unit Performance
Based on Different Schemes and with Different Initial Parameters
A. P. Tarabrin, Polzunov Boiler and Turbine Research Institute, NPO CKTI, St. Petersburg, Russia
V. A. Schurovsky, Gas Research Institute, VNIIGAS, Moscow, Russia
A. I. Bodrov, Turbotect Sankt-Petersburg Ltd.
J.-P. Stalder, Turbotect Ltd.
June 1998, Stockholm, Sweden

Gas Turbine Compressor Fouling - Phenomena and Remedy
Jean-Pierre Stalder, Turbotect Ltd.
June 1997, AIM, Liëge, Belgium

Transactions of the ASME "Journal of Turbomachinery", Volume 120, April 1998, page 256 to 262 (ASME Paper 96-GT-363)
An Analysis of Axial Compressor Fouling and a Blade Cleaning Method
A. P. Tarabrin, Polzunov Boiler and Turbine Research Institute, NPO CKTI, St. Petersburg, Russia
V. A. Schurovsky, Gas Research Institute, VNIIGAS, Moscow, Russia
A. I. Bodrov Turbotect Sankt-Petersburg Ltd.
J.-P. Stalder, Turbotect Ltd.
June 1996, Birmingham, England

ASME Paper 94-GT-436
Compressor Washing Maintains Plant Performance and Reduces Cost of Energy Production
Jean-Pierre Stalder, Turbotect Ltd.
and Peter van Oosten, UNA, Utrecht, NL
June 1994, Den Haag, The Netherlands
(October 1994, TMC Kuala Lumpur, Malaysia)